calcPageSize())"
/>
Outdoor Tension Lightbox 100
Do you need a compact illuminated frame that also performs outdoors? The Outdoor Tension Lightbox 100 is a weather-resistant aluminum tension frame with integrated LED lighting. It is suitable for retail, façade displays, and permanent outdoor advertising.
Available from stock
LED lighting for maximum visibility
The waterproof LED modules illuminate your fabric from the back, ensuring an even light distribution across the entire surface. Your message stands out, even in the dark or in bad weather. The LED lighting consumes little energy and lasts for many years without the need for replacement.
Storm-resistant and waterproof
The Outdoor Tension Lightbox 100 uses stainless steel tension screws to keep your fabric tightly stretched. The 18 mm raised edge profile keeps everything securely in place. Your fabric remains under tension, even in strong wind conditions.The frame has an IP67 protection rating, making it fully waterproof. Both the LED modules and all electrical connections are resistant to rain, snow, and moisture.
The frame is maintenance-free and can also be used indoors, for example in showrooms, shops, or exhibitions. For large formats (such as 10×3 meters), the frame can be expanded with a 4-way reinforcer. These additional reinforcement profiles ensure stability and tension even in large installations.
Quick installation and easy fabric replacement
The Outdoor Tension Lightbox 100 consists of two profiles with a limited number of components, allowing for fast and simple installation. The frame is easily mounted on the wall. To replace the fabric for a new campaign, simply loosen the tension screws, remove the old fabric, and install the new one. The LED lighting remains in place.
Frequently asked questions
Is there also a non-illuminated version of the Outdoor Tension Lightbox 100?
Yes, there is. If you are looking for a non-illuminated version of this system, check the Outdoor Tension 100, which has the same strong tensioning system but without LED lighting.
What type of fabric should I use?
You should use SEG fabric with a 14x3 mm flat keder. The fabric must be light-transmitting for optimal illumination.
Does the frame stay tight in windy conditions?
Yes, the Outdoor Tension Lightbox 100 is storm-resistant thanks to its strong tensioning system with stainless steel screws and raised edge profile.
Are the LED modules waterproof?
Yes, the Outdoor Tension Lightbox 100 has an IP67 protection rating. All LED modules and electrical connections are fully waterproof.
Can I dim the frame?
This depends on the selected LED modules. Please contact our team for available options.
| Pre-drilled | No |
|---|---|
| Open / closed finish | Open and closed |